Down to: Dual
Direction Arrow or Series
300 Hall Lantern
The Electronic Direction Arrow
Green Order Code SA1G
Red Order Code SA1R
Lenses Colour Smoke Grey, Either Triangular as shown above. Available either Flush fitting or Raised, please specify when ordering. Square Lens, Square 80 x 80. Both lens types are require 2 x M4x30 horizontal studs at 47.5mm pitch.
Panel Mounting Panel thickness may be between 2 - 2.5 mm. Switching Components Co. can also supply the Panel and Enclosure to suit your choice of components.
Dimensions Rear depth of unit behind mounting panel: with Triangular Lens = 25mm, with Square Lens = 29mm. Overall dimensions of Unit including mounting brackets = 72 x 100mm. Brackets may be assembled horizontally or vertically.
Features
- Compatible with combined 2-wire power signaling system using DXG1 interface.
- Compatible with combined 2-wire power signaling system using DXG1 interface.
- Efficient switch mode DC / DC power conversion system 9 - 37 Volts.
- Optimum efficiency at 24 V for lowest transmission losses.
- Standard available colours: Red and Green.
- Alternate activation by positive and negative trigger inputs.
Operating Conditions
- Input Voltage range (power/signal) 9 to 37 Volts D.C. or A.C.
- Standby current / power @ (powered) 2mA 48mW (power with no trigger).
- Active current / power @ 24V (arrow on) 50mA 1200mW.
- Arrow details 28 x 5mm, high efficiency L.E.D's.
- Operating temperature 0 to +55 degrees.
- Storage temperature -40 to +85 degrees.
- Power and Data input +VE, -VE, via terminal blocks with wire guards, max wire size 2.5mm Sq.
Triangular
66x66mm
70mm Diameter
Square
60x60mm
Dual Direction Arrow
Features
-
Compatible with combined 2-wire
power signaling system using DXG1 interface board. -
Standard available colours. Red and Green.
-
Alternate activation by positive and
negative trigger inputs. -
9 - 30 Volt AC / DC.
-
Lens supplied.
-
Panel and Back Boxes are available
from our standard range.
